![Makita Makita UR014GZ 40V Cordless Grass Trimmer, Loop Handle (XGT) [Bare], Power Tools Routers & Planers — Southend Philippi](/pimg/power-tools__makita-ur014gz-40v-cordless-grass-trimmer-loop-handle-xgt-bare.jpg)
Makita UR014GZ 40V Cordless Grass Trimmer, Loop Handle (XGT) [Bare]
It's what's INSIDE that counts. Makita UR014GZ 40V Cordless Grass Trimmer, Loop Handle (XGT) [Bare] 450 mm (17-3/4″) Cordless Grass Trimmer, Loop Handle 40 Vmax XGT™ Li-ion[BARE TOOL] • 40 Vmax XGT BL AFT Cordless Grass Trimmer, Loop Handle • High output power equivalent to that of 35 mL class engine models • Compatible with ø450 mm Nylon cutting head • “High-torque mode • The current limiting threshold is raised to extend the load range where these models can run at a constant speed, making them applicable to heavy duty operation • Recommended for heavy-duty operation where particularly high torque is required, such as shredding operation, cutting down bush, etc.
- Specifications
- MAX OUTPUT W C
- Brand
- Makita
- Category
- Power Tools
- Subcategory
- Routers & Planers
- Sold per
- unit
- Pricing
- Request a quote (RFQ)
- Delivery
- Nationwide, same-day quote
Product details
• Tap the mode selection button for High-torque mode/ Normal mode” • “
Low noise level is achieved by: using a low-speed and high-power motor of our own design to reduce the wind noise of motor eliminating the need for gear reduction inside motor housing to remove gear noise” • With loop handle and narrow protector, designed exclusively for use with nylon cutting head • “Variable speed control by lever • • enables user to adjust to desired speed and to hold on the speed • • Finger fatigue from long continuous operation or repeated on/off operation has been reduced due to shorter trigger travel and reduced trigger pull resistance, which have been achieved by redesigning: • ∙ Variable speed control lever (Adjusting lever) for use as variable speed control only • Trigger switch for on/off control in single-speed mode only” • Rigid ø25.4 mm shaft pipe ensures high rigidity equivalent to that of 35 mL class engine models such as the model of competitor S • Rear end mounted motor • AFT (Active Feedback sensing Technology) • WetGuard/ IPX4-compatible • Battery and charger are sold separately.
UTTING WIDTH Nylon cutting head: 450 mm (17-3/4″) NO LOAD SPEED (RPM) – SPINDLE SIZE M10 x 1.25 LH DIMENSIONS (L X W X H) w/o Cutting tool, w/
BL4050F: x 330 x 304 mm (74-1/2 x 13 x 12″) NET WEIGHT 5.5 – 6.7 kg (12.1 – 14.8 lbs.) Accessories (may vary) - Lifetime Service Warranty.
